The only compatible EcoHitch trailer hitch receiver for your 2014 Volkswagen Jetta is part # 306-X7311, which only comes with a 2" receiver tube opening. To be able to mount your 1-1/4" accessories you can just get a reducer sleeve # HT02 to drop the size down. This would give you ability to haul 2" accessories, which is the most common size for most accessories. view full answer...
The Curt Class 1 Hitch # C11264 which is a fit for a 2005 Nissan Maxima I can confirm does not come with a hitch pin and clip. That said, we do sell this separately using the Pin and Clip For Class I and II Trailer Hitch Receiver Hitch part # PC2. The pin and clip is usually included with the accessory but very rarely if ever included with the trailer hitch.
I have attached a list of some hitch mounted accessories you may be interested in as well below view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 76020 for your 2023 Mazda CX-9 is no longer compatible with the J-Pin 63201. Draw-Tite stopped making their receivers compatible with this pin in 2021 and we have long sold through all those receivers. We do offer their QSP Trailer Hitch Silencer and Cover # 63080 which will also help to reduce the rattle on 2" ball mounts and hitch mounted accessories. But you will still need a separate Lock # e98882 to secure everything.
I do recommend... view full answer...
Hi John,
The Trimax Shackle Hitch for 2" Receivers # TMX82ZR would fit in a class III 2" trailer hitch receiver and has a 10,000lb capacity so it should be more than enough to handle the weight of your 2020 Jeep Cherokee (3,590 to 4,250lbs) if you had to pull it out of a ditch. It does not come with a hitch pin so you'll either need part # TMX33VR or # e98881 if you'd prefer to lock the accessory in the trailer hitch and prevent theft. This specific accessory is not made in America. view full answer...
Hey Tony, for your 2020 Nissan Murano we only have 2 inch hitches that are Class III like the part # e98907 available. Most of the time this is the preferred hitch size as it has the most accessories made for it and the best capacities. view full answer...
I reached out to Draw-Tite to verify if there Max-Frame Trailer Hitch Receiver # DT75GR would fit on your 2020 Mercedes Benz GLE 350. I was told at this time they cannot confirm the fitment for either receiver and do not recommend trying to install it.
We do have the Stealth Hitches Hidden Rack Receiver # SH99MR which will allow you to carry a hitch mounted accessory with your GLE. If you need to also tow a trailer you will need to either add the Towing Kit # SH62MR or get the Receiver... view full answer...
Hey John, for your 2011 Honda CR-V I would recommend the etrailer hitch part # e39AR which has a 2 inch opening, great towing capacities, and and easier install. The 2 inch hitch size is the most popular hitch size which means the most accessories are made for it. view full answer...
Since your tonneau cover has accessory slots on it the Yakima OverHaul HD ladder rack part # Y01151-5755 would fit and work great on your 2023 Ford Raptor. view full answer...
They HydraPro EOH Actuator part # DH54FR that you referenced was designed to be powered by the 12 volt accessory circuit of the tow vehicle's 7-way which typically also would get ran to the trailer battery as a charge circuit for it. So as long as your trailer battery has the 12 volt circuit ran to it this system could be powered by the battery as well. view full answer...
The Curt Trailer Hitch Receiver 13459 is our part # C47HR. We have to use part numbers different from the manufacturers as we carry parts from hundreds of manufacturers and the part numbers aren't always going to be different. This receiver is confirmed to fit your 2024 Subaru Forester Wilderness.
I recommend installing the Curt T-Connector Vehicle Wiring Harness # C56040 when you install the receiver. This 4-way flat connector is the connector most commonly found on trailers you might... view full answer...
Hey van, unfortunately we do not offer replacement keys for the GM brand roof racks. Your best bet for that would probably be to contact a Chevy dealership. Since it is a GM branded accessory they should be able to provide keys, or at least tell you where to get them. I did find a GM parts stie that stated "Replacement keys can be ordered from your local dealership with Part # 84835038 and the Key Code (i.e. J01, J02, J03, etc.) imprinted on the lock cylinder." view full answer...
Sorry Eric but that is a no. All of the Draw-Tite Hitch's like item # 36597 that fit the 2024 Honda CR-V specifically exclude the hybrid models. I checked with Draw-Tite to confirm this information.
Instead, I recommend using the Curt Trailer Hitch item # C13397 which has been confirmed to fit the Hybrid Sport model of the 2024 CRV. This means there won't be any concerns with your batteries and it will be covered by Curt's warranty since they have approved it.
The Curt item # C13397... view full answer...
We do not have a custom fit hitch specific to your 2023 Kia Forte GT but we did receive a review from someone who mentioned they were able to install it on their 2020 Forte GT but it took cutting a hole in the bumper and modifying part of the frame. I cannot speak to what all modifications were required but they used the Curt Trailer Hitch Receiver # C55HR.
I recommend installing the 4-way # C54ER when you install the receiver. This will allow you to connect to the lights on a small trailer... view full answer...
The Classic Accessories PolyPro III Deluxe RV Cover # CA80103 is going to be the best cover we carry for the stock dimensions of your 2023 Mercedes Sprinter 144RV. This cover fits up to 20' long vans that can be up to 9'9" tall. If your van is longer due to a spare tire mounted on the rear door or other parts you would want to step up to the next larger size # CA80104.
The cover can be installed by one person but if you have any roof mounted products you would need to get on the roof... view full answer...
Hey Leo, the Camco UltraGuard RV cover part # CAM45745 that you referenced is a fit for your 2008 Winnebago Outlook Class C that is 30 foot long. When these covers are fit they are designed to have the standard roof accessories like AC units and ladders taken into account so you do not need to add in any additional length to the cover fit. view full answer...
All of the base plates for your 2014 Jeep Wrangler are going to require drilling. I do recommend going with the Roadmaster # RM-521448-5 which offers the direct connect arms. I prefer Roadmaster as they test their products more than any other manufacturer which is why they are one of the only manufacturers which do not require you to use a safety cable around the base plate and to the frame on your Jeep.
The Roadmaster Nighthawk All-Terrain Tow Bar # RM-676 is our best seller with the... view full answer...
Hey Johnny we do have great hitch options that fit your 2007 Ford Escape Hybrid like the etrailer part # e56AR which has great towing capacities, is the more popular 2 inch size, and has a matte black finish that helps make it a little less visible. view full answer...
It looks like you have the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28 installed on your enclosed trailer's existing rain gutter rails. For a different trailer that does not have these mounting rails I recommend using a track type rack system such as the Yakima HardTop SL # Y01618 since we do not have adapters to allow installing the Rack'em to a flat roof surface.
This adjustable Yakima rack uses tracks that mount to the trailer roof (not to the side edge like the Rack'em) and... view full answer...
Yes, both the 2wd and 4wd of the 2019 Acadia can be flat towed according to GMC. Here is what I recommend:
Roadmaster Direct-Connect Base Plate Kit # RM-523189-5
Roadmaster BlackHawk 2 All-Terrain Non-Binding Tow Bar # RM-422
RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267
Demco Stay-IN-Play Duo Flat Tow Brake System # SM99251
Roadmaster Battery Charge Line Kit # RM-156-25
As with any flat tow setup we recommend... view full answer...
I don't see any reason why you couldn't, Josh. As long as the hitch has adequate capacity. You would definitely want to be sure the hitch properly anchored to the floor or wall or wherever you intend to install it to keep it from tipping over. If you can get that part down, you can absolutely use the RockyMounts GuideRail Bike Rack # RKY97ZR for bike storage. You may also be interested in the Curt Wall Mount for 2" Hitch Accessories # C97DR which could definitely be used for your application.
We... view full answer...
Go To Results